Solar Meshtastic repeater (roof or pole)
A weatherproof Meshtastic node with its own solar panel and battery, fixed high up, that passes on everyone's messages and stretches your mesh across the area.
01When it saves you
Pocket nodes at street level often can't hear each other through buildings. A node on a roof or pole sees over them, so a text from a phone at the shops can reach a phone at home. Because it runs on solar, it keeps going through a power cut that lasts days.
02How it works
A repeater is an ordinary Meshtastic node in a sealed box, placed high up. It hears messages from nodes below and sends them on. Height is the whole trick: at 868 MHz, radio works best when the two ends can almost see each other.
A small solar panel charges a battery in the day, and the node's low-power chip (an nRF52840) runs from the battery overnight and through dull spells. It needs no mains power and no Wi-Fi.
Set its role to CLIENT_BASE if it's mainly there for your household's own nodes. Use ROUTER only if it sits in a commanding spot that helps the whole local mesh, because ROUTER uses more power. The old REPEATER role was deprecated in firmware 2.7.11.
03What to buy
The unit in our diagram. It arrives assembled with Meshtastic already installed and the aerials inside the case. The Solar Battery Lite holds a 5,200 mAh pack, and RAK's solar kit pairs it with a 10 W panel.
Where: The RAKwireless store, or EU sellers that ship to the UK such as Hexaspot. Pick the 868 MHz version.
A 5 W solar panel, four 3,350 mAh 18650 cells and GPS in one weatherproof (IPX6) box, at a UK price. When we checked, The Pi Hut listed the P1-Pro as coming soon.
Where: The Pi Hut.
Avoid
- 915 MHz versions. Many RAK and Seeed listings default to the American band.
- Settings that don't match your other nodes. A repeater only helps if it uses the same region and modem preset as the nodes it should relay.
- Mounting the panel in shade or behind a chimney. RAK says its solar battery needs direct sun with no shadowing.
- Opening the sealed cases to tinker. RAK warns this can break the waterproofing.
- Non-rechargeable lithium (LiSoCl2) cells as the power source. RAK advises against them for Meshtastic.
04You’ll also need
- A safe, high spot: a chimney bracket, gable wall, shed roof or garden pole.
- Pole clamps or a bracket, and stainless fixings.
- A phone with the Meshtastic app to set it up over Bluetooth before it goes up.
- For anything above ladder height, a roofer or aerial installer. Don't work on a roof alone or in wet or icy weather.
!Limits, honestly
- Range figures vary hugely. Meshtastic's 331 km ground record was between mountain tops. Community tests in towns with no line of sight report about 2 km, and 1 to 3 km with better aerials. A roof node mainly helps by clearing nearby buildings.
- Winter sun in the UK is weak. A RAK seller quotes about 36 days without sun for the Solar Battery Lite with a 10 W panel: that's a vendor figure, not a test.
- RAK's datasheet says the battery only charges between 0 and 45°C, so in a frosty week it runs on stored charge.
- It relays text only, at the same slow speeds as the pocket nodes.
- It's visible on a roof or pole and can be stolen or damaged.