Get Started

Multimeter for batteries, fuses and cables

A handheld meter that tells you whether a battery is flat, a fuse has blown or a cable is broken.

TypeBuyCostabout £29 to £385Set-up time30 minutesLevel5: Powered for days

01When it saves you

When something stops working in a power cut, the question is always: is it the battery, the fuse or the lead? A multimeter answers in seconds, so you swap the right part instead of guessing and wasting your last good batteries.

02How it works

A multimeter measures volts (how much push a battery has), resistance (whether electricity can get through something) and continuity, which beeps when two probes are connected through an unbroken wire or fuse.

For home use you mostly need three settings: DC volts for batteries, continuity for fuses and cables, and resistance now and then. Everything else on the dial can wait.

03What to buy

Our pick
Fluke 117about £385 (RS Components, £385.20 inc VAT)

Our reference graphic. Rated CAT III 600 V, with a non-contact voltage alert, a mode that ignores 'ghost' voltages, about 400 hours from a 9 V battery and a 3-year warranty. It's an electrician's meter, which is more than most homes need.

Where: RS Components, Farnell, CPC, specialist test-equipment shops

Budget
UNI-T UT133Aabout £29 (Maplin Pro, £23.84 plus VAT)

Auto-ranging (it picks the scale for you), continuity buzzer, backlight and 10 A fused current range, from a known test-gear maker. For batteries, fuses and leads it does everything a Fluke does. Check the CAT rating printed on the meter before you trust it near anything bigger than a car battery.

Where: Maplin Pro, other electronics shops

Avoid

  • No-name meters with no CAT rating printed by the sockets, or a rating that looks stuck on. Rated, fused inputs are what stop a mistake turning into a burn.
  • Cheap Fluke look-alikes and 'Fluke' meters far below the usual price on marketplaces. Buy from an authorised distributor.
  • Paying for features you won't use (temperature, frequency, data logging) when all you need is volts and continuity.

04You’ll also need

  • The right battery for the meter (9 V for the Fluke 117, 2 x AAA for the UT133A) and a spare.
  • A short note of what each battery in your kit should read new (it's printed on the battery).

!Limits, honestly

  • Never test mains wiring, sockets, light fittings or the fuse box. Electrical Safety First says any electrical work should be left to competent professionals, and some must be signed off under Part P of the Building Regulations. That's a job for a registered electrician.
  • Even a CAT-rated meter is only safe in trained hands on mains. Use yours on batteries, fuses, leads and 12 V or USB things.
  • Always unplug a cable or appliance before checking it with continuity or resistance.

+Works with

Next in module 5Faraday bags sold for EMP protection (and the one that's worth it)