Get Started

USB-C soldering iron that runs from a power bank (Pine64 Pinecil V2)

A pen-sized soldering iron powered by USB-C, so you can fix a broken wire anywhere, even with the mains off.

TypeBuyCostabout £60Set-up time1 hour to learn the basicsLevel5: Powered for days

01When it saves you

When shops are shut or deliveries stop, a snapped wire on a torch, radio, speaker or battery lead turns into a lost tool. With a small iron that runs from a power bank, you can rejoin it yourself in five minutes, at the kitchen table or in the car.

02How it works

Soldering joins two metal parts with a melted alloy (solder) that sets into a solid electrical joint. The hot tip heats the joint, then you feed in solder.

The Pinecil V2 takes power over USB-C Power Delivery (PD). It needs a charger or power bank that can supply 20 V at 3 A or more; at 20 V it gives about 50 to 64 W, plenty for small repairs. It also runs from 12 to 24 V barrel-plug supplies (up to 88 W at 24 V, the official limit). Plain 5 V USB ports, like most laptop ports, are only enough for firmware updates, not for heating.

03What to buy

Our pick
Pine64 Pinecil V2 (bundle with cable and mini stand)about £60 (Testclips, £59.83)

Small, open-source, heats from USB-C and comes with a tip. Testclips ships from Great Britain and is on Pine64's own list of official resellers.

Where: Testclips (UK). Pine64's EU resellers (Eleshop, blinkyparts) also ship here.

Avoid

  • Fakes. Pine64 says a genuine Pinecil is black with a green grip; all-blue irons and blue or red boxes are copies. A V2 made since August 2022 has the BL706 Bluetooth chip, and you can check it with Pine64's online authenticity checker.
  • Phone chargers and power banks that only do 5 V or 12 V. The iron heats slowly or shows 'thermal runaway'. Check the power bank lists 20 V PD output on the port you use.
  • Magnetic USB-C cables. Pine64 says they aren't USB compliant and not to use them.

04You’ll also need

  • A USB-C PD charger or power bank that supplies 20 V at 3 A or more (65 W is a good size).
  • A 100 W rated USB-C cable (the bundle includes one).
  • Rosin-core solder (lead-free is easiest to buy), a brass-wool tip cleaner, heat-shrink tubing and a lighter or heat gun, and some solder wick for removing old solder.
  • Something heatproof to work on and a pair of fine pliers.

!Limits, honestly

  • Not for mains (230 V) appliances or leads. A badly repaired mains lead is a shock and fire risk; take those to a repair shop.
  • Fine for wires and through-hole parts. Tiny surface-mount repairs on phone boards take practice and better tips.
  • Needs a 20 V PD power source. A 5 V phone charger won't do.

+Works with

Next in module 5Multimeter for batteries, fuses and cables